UC5282

From RTEMSWiki
Revision as of 16:26, 26 November 2010 by Danielcode (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
UC5282
5282pic.jpg
MCF5282 uCdimm - uC5282
Board NameuC5282
ManufacturerArcturus Networks Inc.
Referencehttp://www.arcturusnetworks.com/products/uc5282/
Architecture32 bit RISC architecture based on the ColdFire V2
CPU ModelMCF5282 Freescale ColdFire
MonitoruBoot, uMon
Runs on Simulator?N/A
AliasesNo
RAM8/16 MB SDRAM, 64 KB SRAM
Non-volatile Memory4/8/16 MB Flash, 16 KB EEPROM
Serial Ports2 x RS232 UARTs (one available as TTL also), QSPI with four chip selects
VideoVideo Unspecified.
OtherRoHS and FCC Compliant


Contents

Overview

The uC5282 is a compact, embedded microprocessor module ideal for networked control and communication applications. The device is available in a standard 144pin soDIMM edge connector format to allow fast integration into products. The module is based on the Freescale® ColdFire® MCF5282 microprocessor and includes all required system memory and physical terminations to enable most applications without the need for external circuitry. The uC5282 features Ethernet, CAN and serial communications systems as well as standard peripheral device connectivity using I2C, QSPI or data/address logic.

UC5282 Module Block Diagram.jpg

Board Setup

If there are special jumper or ROM monitor settings, describe them.

Downloading and Executing

Describe the download procedure.

Debugging

How do you debug code on this board? What gdb setup? BDM, stub, etc?

Test Reports

2006-11-18 -- CVS 4.7 branch with most recent tools and patches tested with EPICS.

GCC=gcc-4.1.1
BINUTILS=binutils-2.17
NEWLIB=newlib-1.14.0
BINUTILSDIFF=binutils-2.17-rtems4.7-20061021.diff
GCCDIFF=gcc-core-4.1.1-rtems-20060909.diff
NEWLIBDIFF=newlib-1.14.0-rtems4.7-20061019.diff

References


Personal tools
Namespaces

Variants
Actions
Navigation
Gedare's Special Help
Toolbox