panic error with powerpc/virtex BSP
pierre.kestener at cea.fr
Tue Oct 2 03:55:16 CDT 2007
I am having problems in running the RTEMS helloworld example on a ML405
board (very similar to ML403). I made the FPGA design with the Xilinx
EDK tool and then modified the xparameters_dflt.h that is in the RTEMS
BSP with the one generated by EDK.
When running the helloworld, i receive the following output:
opb_intc_init: mask = 0x7
rtems-220.127.116.11(PowerPC/PowerPC 405/virtex) PANIC ERROR 5
system stopped, press RESET
I am not sure to what refer the number 5 as a PANIC ERROR. Has someone
an idea of what could done here ?
Thank for your help.
More information about the rtems-users