RTEMS 4.6.99.3 On-Line Library

Introduction

BSP and Device Driver Development Guide

Chapter 1: Introduction

Before reading this documentation, it is strongly advised to read the RTEMS Development Environment Guide to get acquainted with the RTEMS directory structure. This document describes how to do a RTEMS Board Support Package, i.e. how to port RTEMS on a new target board. Discussions are provided for the following topics:

RTEMS Board Support Package Organization
Makefiles and the Linker Command Script
Board Initialization Sequence
Device Drivers Including:
- Console Driver
- Clock Driver
- Timer Driver
- Real-Time Clock Driver
- Non-Volatile Memory Driver
- Networking Driver
- Shared Memory Support Driver
- Analog Driver
- Discrete Driver

The original version of this manual was written by Geoffroy Montel <g_montel@yahoo.com>. When he started development of the gen68340 BSP, this manual did not exist. He wrote the initial version of this manual as the result of his experiences. At that time, this document was viewed internally as the most important "missing manual" in the RTEMS documentation set.

BSP and Device Driver Development Guide