[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Can't get working libbsdport on rtems4.10 with VIA EDEN onboard Ethernet RTL810X



Chris,
many thanks to get your sources ... the libbsdport works as it should.

I had made a very stupid failure.
In my Makefile a have to link to  libbsdport.a and the used driver-libs.
I linked to the libbsdport first followed by the driver-libs so the weak aliases where not be "overloaded".
In your Makefile you have done it right : -lif_re -lif_fxp -lbsdport 

sorry for bothering this user-group,
Heinz

On Dec 9, 2010, at 12:17 AM, Chris Johns wrote:

> On 9/12/10 1:59 AM, Heinz Junkes wrote:
>> i need help to setup networking.h so that netdemos will attach the internal RTL8139 ethernet-controller.
>> 
>> I use rtems4.10 for pc368 and i have loaded the libbsdport from cvs.
>> 
>> The libbsdport_netdriver_table in devicet.c (line 287) is always NULL even if i setup the table in networking.h
>> for the "rl" - device.
>> 
>> I was wondering if anybody has a working networking.h for that processor-type/system. I assume some strange
>> linker issues, missing pci-support or even wrong settings.
>> 
> 
> My RTL development app uses libbsdport on the i386. Please take a look at init.c in http://www.rtems.org/ftp/pub/rtems/people/chrisj/rtl/rtl-20101020.tar.bz2 to see if it helps.
> 
> Chris
> 
> _______________________________________________
> rtems-users mailing list
> rtems-users at rtems.org
> http://www.rtems.org/mailman/listinfo/rtems-users

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2066 bytes
Desc: not available
URL: <http://www.rtems.org/pipermail/rtems-users/attachments/20101209/d70bc218/attachment.p7s>