[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

4.9.0 with shell via telnetd - new telnetd issue - SOLVED



Robert S. Grimes wrote:
> Joel Sherrill wrote:
>   
>> Robert S. Grimes wrote:
>>     
>>> P.S. This shell is great!  Why didn't I realize it was around 
>>> sooner?  I had been using the RTEMS monitor - is that a precursor?
>>>   
>>>       
>> A cousin.  But we are trying to merge and share overlapping
>> functionality
>>
>> The shell has been there a long time but between 4.8 and 4.9
>> Chris Johns and myself spent a LOT of time improving it and
>> adding commands.  I also wrote the manual.
>>     
> The manual is new, right?  I suspect I didn't know of it because it 
> wasn't exposed at that level (i.e. part of the standard documentation set)?
>   
The manual is new but it is linked to at the bottom of the "C/C++" section.

http://www.rtems.org/onlinedocs//doc-current/share/rtems/html/index.html
> If I can get some time next week, I'll write up what I did on my two 
> applications, which is basically what Alan and Gene posted, and put it 
> on the wiki.  Not sure where to put it - probably the HowTo page.  
> Hopefully, those you and/or Chris will be able to review it for 
> accuracy, in case of errors on my part.
>
>   
Probably a new HowTo is the right approach.

Any bugs in the shell manual need to be fixed as well.
>> Commands are easy to add and easy to improve.  If you
>> have an idea, run with it.
>>     
> I like this!  I'll be using it as heavily as time permits, I'm sure!
>
>   
Chris and I grew it in parallel as we worked on different
applications. The user I am helping has hooked in custom
commands to peer into their application.

--joel
> Thanks again,
> -Bob
>
>   
>> Some interesting features:
>>
>> + prompt is generated by a method that you as a user
>>   can replace.  This means you can put current application
>>   information, etc in it.
>> + command set is configurable and extensible so you
>>   can turn it into a very application specific diagnostic
>> + telnet and serial accessible
>> + Scripts (no logic yet) are supported.
>> +You can mount filesystems.
>> + Some commands are from BSD.
>> + You can set the date this way. :-D
>>
>> Peruse the shell manual.
>>
>> --joel
>>
>>     
>
>   


-- 
Joel Sherrill, Ph.D.             Director of Research & Development
joel.sherrill at OARcorp.com        On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
   Support Available             (256) 722-9985