[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

M68k/ColdFire: FPU context initialization


thank you for the hints. We are currently using the Lauterbach Trace32
for debugging this target, so we have access to all the registers etc.


Chris Johns schrieb:
> Thomas Doerfler (nt) wrote:
>> We just want to make sure that we initialize things properly, that's why
>> I started this thread.
> If you need BDM debugging support the BDM project on SF has a remote gdb 
> server in CVS that I am still testing. It works with the rtems-4.9 debugger.
> The v4e core is supported but I have not tested it. The FPU and emac registers 
> should be available in the debugger.
> Regards
> Chris
> _______________________________________________
> rtems-users mailing list
> rtems-users at rtems.com
> http://rtems.rtems.org/mailman/listinfo/rtems-users

embedded brains GmbH
Thomas Doerfler           Obere Lagerstr. 30
D-82178 Puchheim          Germany
Tel. : +49-89-18 90 80 79-2
Fax  : +49-89-18 90 80 79-9
email: Thomas.Doerfler at embedded-brains.de
PGP public key available on request

Diese Nachricht ist keine gesch?ftliche Mitteilung im Sinne des EHUG.