[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[no subject]



Till Straumann wrote:
> I'm not sure if the RPC agent is supported on m68k.
> Plus, you might have to patch gdb for this to work (but I'm not
> sure about that).
>
> AFAIK, you can use the low-level stub in
>
> c/src/lib/libbsp/m68k/shared/gdbstub/
>
> or my target agent
>
> http://www.slac.stanford.edu/~strauman/rtems/gdb/
>
> both use gdb's 'remote' target and protocol.
>
>   
If this is librdbg, it was incompatible with any gdb 6.x due to internal
changes in gdb.  It is probably time to kill it in 4.8.

--joel
> HTH
> -- Till
>
> Martin Strand wrote:
>   
>> Hi everyone.
>>  
>> I'm working with my final assignment for my bachelor degree in computer science and have come up with a problem when trying to enter the "setrpcmode sun" command in the debugger.
>> My target is a mvme167 board, hence I use the m68k-rtems4.7-gdb. I first tried the rpm to install the gdb but didn't succed, and therfore went on to use the gdb configure script directly, which made the 'm68k-rtems4.7-gdb'-executable much larger than the one built with the rpm.
>> I found some old add (from 2003) about this but couldn't figure out how to solve the problem by reading that one.
>> I've built RTEMS-4.7.1, and my applications seams to be running fine on the target.
>>
>> The following is printed when I try to enter the command:
>>
>> [root at localhost Desktop]# m68k-rtems4.7-gdb
>> GNU gdb 6.5
>> Copyright (C) 2006 Free Software Foundation, Inc.
>> GDB is free software, covered by the GNU General Public License, and you are
>> welcome to change it and/or distribute copies of it under certain conditions.
>> Type "show copying" to see the conditions.
>> There is absolutely no warranty for GDB.  Type "show warranty" for details.
>> This GDB was configured as "--host=i686-pc-linux-gnu --target=m68k-rtems4.7".
>> (gdb) setrpcmode sun
>> Undefined command: "setrpcmode".  Try "help".
>> (gdb)
>>
>>
>> If anyone have a solution for this problem, it would make my day.
>>
>> Best regards, Martin Strand
>> _________________________________________________________________
>> News, entertainment and everything you care about at Live.com. Get it now!
>> http://www.live.com/getstarted.aspx
>> _______________________________________________
>> rtems-users mailing list
>> rtems-users at rtems.com
>> http://rtems.rtems.org/mailman/listinfo/rtems-users
>>   
>>     
>
>
> _______________________________________________
> rtems-users mailing list
> rtems-users at rtems.com
> http://rtems.rtems.org/mailman/listinfo/rtems-users
>