[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Xilinx IP core drivers for RTEMS- Keith Robertson still around?



junercb wrote:

> Can you send your "system.mhs" to me,

The relevant portions of my system.mhs are here:

BEGIN plb_temac
...
PARAMETER C_BASEADDR = 0x50000000
PORT IP2INTC_Irpt = plb_temac_0_IP2INTC_Irpt
...
END

BEGIN opb_intc
...
PARAMETER C_BASEADDR = 0x40020000
PORT Intr = plb_temac_0_IP2INTC_Irpt & other_Irpt
...
END

So... as discussed in previous emails, in this case the base address of 
the temac (bpar) is 0x50000000.  The interrupt index (irqno) for the 
temac is 1.  For the other_Irpt, the interrupt index is 0.

> and the opbint.c,opbint.h and other needed files?

The drivers for the opb interrupt controller have been posted to the 
list a couple of times in the past.  However, I'll attach my ones again.


Cheers.

Keith
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: opbintctrl.h
Url: http://rtems.rtems.org/pipermail/rtems-users/attachments/20070516/32442c12/attachment.h 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Makefile.am
Url: http://rtems.rtems.org/pipermail/rtems-users/attachments/20070516/32442c12/attachment.pl 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: opbintctrl.c
Url: http://rtems.rtems.org/pipermail/rtems-users/attachments/20070516/32442c12/attachment.c