[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Support for multiple ethernet ports

Alex Holeczy wrote:
> RTEMS Version : 4.5.0
> Processor     : MIPS
> network device: National Semiconductor dp83815
>     Can't set eth2 address: File exists

I have had a number of strange problems (including this one), when I
to set both interfaces on the same subnet (eth0= and
When I moved the second interface to the different subnet (
worked. It still does :) It seems logical, since you usually don't need
interfaces on the same network, but still, the error report is

Try to swap the order of interfaces in rtems_bsdnet_config structure. If
this is a 
problem, you should get the same message for the other interface.