[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
How to get output from dump_malloc() ?
- Date: Thu, 25 Jan 2001 08:57:15 -0700 (MST)
- From: vac4050 at cae597.rsc.raytheon.com (OUTWATER ~ KEITH J /5G3110)
- Subject: How to get output from dump_malloc() ?
That's what I thought. I built and installed the RTEMS debug variant and then
did a "make debug" . I ran my program and still got no output.
Also tried a make VARIANT=DEBUG on my program, but no luck.
Also tried to build RTEMS with make VARIANT=DEBUG RTEMS_DEBUG=1. Still no luck.
BTW, I'm using 4.5-beta3
> OUTWATER ~ KEITH J /5G3110 wrote:
> > greetings all -
> > I'd like to use dump_malloc, but I get no output when I call the function.
> > Looking through <bsp>/lib/include/rtems/debug.h, there seems to be support
> > enabling/disabling debug stuff.
> > Is there any documentaion avaialble on this?
> At this point in time, the default way to get malloc_dump and other debug
> stuff turned on is to build the debug variant (make VARIANT=DEBUG)
> > Thanks!,
> > Keith
> Joel Sherrill, Ph.D. Director of Research & Development
> joel at OARcorp.com On-Line Applications Research
> Ask me about RTEMS: a free RTOS Huntsville AL 35805
> Support Available (256) 722-9985