SH-2 snapshot patch

[joel.sherrill at OARcorp.com (Joel Sherrill)]

Merged.

What is the trick to getting patches/diffs which don't result in
spurious
cvs ID diff's? 

"John M. Mills" wrote:
> 
> Greeting -
> 
> I found the problem which prevented opening 'dev/sci1' (the default
> console) with the 'gensh2' (sh7045) BSP. Both SCI ports were being
> initialized against the same minor device number: '0'. When I tried to
> open minor-device '1', it naturally crashed. Fixing that one value in the
> 'sci_device[]' array solved the problem and allowed 'hello.exe' to run.
> 
> No other sample tests ran: they all hung up on the polled-output driver's
> failing to return a 'ready' flag, though this apparently worked in both
> 'hello.exe' and 'hello_g.exe'. Any ideas why 'hello' should be different
> from the other 'tests/samples/*'?
> 
> I attach a unified cvs 'diff' correcting the 'sci_device[]' structure and
> a couple of trivia. Please let me know if there is a preferred way to
> provide this type of patch, and also if the patch can be extracted
> properly - it had a long trip.
> 
> Thanks -
> 
>   John Mills, Sr. Software Engineer
>   TGA Technologies, Inc.
>   100 Pinnacle Way, Suite 140
>   Norcross, GA 30071-3633
>   e-mail: jmills at tga.com
>   Phone: 770-441-2100 ext.124 (voice)
>          770-449-7740 (FAX)
> 
>   ------------------------------------------------------------------------
>                               Name: rtems-19991203.sh2.diff
>    rtems-19991203.sh2.diff    Type: unspecified type (APPLICATION/octet-stream)
>                           Encoding: BASE64

-- 
Joel Sherrill, Ph.D.             Director of Research & Development
joel at OARcorp.com                 On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
   Support Available             (256) 722-9985